|
| |
|
roofing,
cladding made and erected by Reid Steel Buildings UK and Worldwide |
Roofing and Cladding
Below are examples of the various roofing and
cladding options available to you. For more information regarding roofing and
cladding or if you'd like an estimate, please Click
Here to complete our Enquiry form.
|
 |
Single skin profiled metal sheet.
Wall and Roof Cladding
Single Skin Roof Sheeting and Wall Sheeting is obviously the most economic way
of covering steel framed storage warehouses. |
|
 |
Double skin insulated sheet.
Wall and Roof Cladding
Double skin insulated roof sheeting or wall sheeting or both will reduce condensation
and reduce temperature change in a storage warehouse. Insulation is essential
if the storage space is to be heated or cooled. A double skin roof will reduce
the chances of leaks. The fibreglass insulation compacts well for sea freight.
If insulation of storage warehouses is required then the double skin system is
possibly the most cost effective solution. U value can vary from 0.45 W/°C/m²
to 0.20 W/°C/m². |
|
 |
Composite Sandwich. Roof and
Microrib Wall Cladding
Composite Double Skin Sandwich Boards can be used for roofing steel framed storage
warehouses. A nearly flat mini rib composite sandwich panel can be used on walls.
It can be self finish inside and out and can have windows and doors fitted for
a smart look. It is often used around main entrances and offices where the rest
of the storage shed is clad with type 2. |
|
| Protection
- Plain Galvanised,
Plain Aluzinc,
Plain Mill Finish Aluminium,
Stucco Mill Finish
Plain
finishes are cheaper then enamels or plastisols. Plain galvanised sheeting is
the cheapest option. Plain Aluzinc is only slightly more, and will remain attractive
and sound for much longer. Mill Finish Aluminium is also available and is rarely
suitable. |
|
| Enamel
- Polyester Enamel,
Acrylic Enamel,
Tres Haute Durabilité,
PFV2 Enamel,
Double Sided Enamels
Various
different enamels are available on all roof and wall sheeting types for storage
warehouses. Lighter shades recommended as they reduce temperature change. Polyester
and Acrylic finishes are suitable in some applications and longer lasting Tres
Haute Durabilité (THD) and PFV2 enamels may also be available and represent
longer term value. Double sided enamels last better and cost more. |
|
| Plastic
Coating - Single Sided Plastisol,
Double Sided Plastisol
Various
Plastisol PVC coatings make good attractive finishes for steel framed storage
buildings. Light colours are recommended particularly for sunny places. The plastisol
is more durable and abrasion resistant than enamels. For storage buildings exposed
to damaging environmental conditions, double sided Plastisol (200 microns outside
and 100 microns inside) is often the best long term solution. |
|
|
